Sale!

CB163-6001 – Stage 1, S63 High Performance Engine: F10 M5, F12 F13 F06 M6, E70 X5M & E71 X6M

Part Number: CB163-6001 Category: Tags: , ,

$21,599.00

Sale ends on October 31, 2024

Note: $10,000 core charge may apply. See below for parameters or contact us for more details.

-

*Note – Core charge may apply. Contact us for details.

Includes: Forged Rods, Forged Pistons, high performance valve springs for more boost, Labor and machine work for complete overhaul.

Additional Information

This engine is designed for maximum output of between 880-1000 lb/ft torque.

The S63 engine is not designed to have large increase in boost. CarBahn has designed a high-performance engine to handle very high outputs by utilizing higher quality racing components. This engine includes higher quality racing Forged Carrillo connecting rods, CP forged pistons and CarBahn high-performance valve springs. This Engine includes a complete rebuild with a valve job, timing chains, chain guides, tensioners, water pump thermostat, new bearings, seals and gaskets.

The stock high compression ratio is high for CAFÉ. (Corporate average fuel economy). However, this increased compression limits engine performance with higher boost setting by decreasing the size of the fuel air charge in the combustion chamber and by forcing the ignition timing to retard far below MBT (mean best timing). The CarBahn engine has .5 less compression to optimize the engine for the increased boost. If this an emissions legal street car the lowered compression has the added benefit of reducing catalyst inlet temperatures and improved drivability on pump gas.

CarBahn History

Steve Dinan has been building high performance and racing engines for BMW’s since 1977! Winning 12 racing championships including 3 prototype championships and two – 24 hours of Daytona. The same engine shop that builds the racing engines also builds the street car engines. This group of talented engineers, Engine machinist and engine builders has built hundreds of engines. From rebuilds to developing engines making over 625hp on an S65 and over 740hp on an S85.

Engine core acceptance parameters

Must be complete core (factory engine, from oil pan to valve cover)

  • Block must have no:
    • Holes or cracks in casting
    • Holes or crack in covers
    • Bore damage that cannot be honed out
    • Thrust surface damage
    • Journal surfaces damage
    • Bolt hole damage that can’t be repaired
  • Heads must have no:
    • Holes or cracks in casting
    • Holes or crack in covers
    • Thrust surface damage
    • Journal surfaces damage
    • Bolt hole damage that can’t be repaired
  • Additional repair charges could apply for damaged items that are not normally changed during an overhaul and cannot be repaired or serviced
    • Valves
    • Crankshafts
    • Camshafts
    • Guides
    • ValveTronic mechanism
    • Vanos mechanism

Cancer and Reproductive Harm - www.P65Warnings.ca.gov

FITS

  • 2010-2013 BMW X5 M SAV
  • 2010-2014 BMW X6 M SAV
  • 2012-2016 BMW M5 Sedan
  • 2012-2016 BMW M5 Sedan
  • 2012-2018 BMW M6 Convertible
  • 2012-2018 BMW M6 Coupe
  • 2012-2018 BMW M6 Coupe
  • 2012-2018 BMW M6 Convertible
  • 2014-2016 BMW M5 Competition Pkg. Sedan
  • 2014-2016 BMW M5 Competition Pkg. Sedan
  • 2014-2018 BMW M6 Competition Pkg. Convertible
  • 2014-2018 BMW M6 Competition Pkg. Coupe
  • 2014-2018 BMW M6 Competition Pkg. Convertible
  • 2014-2018 BMW M6 Competition Pkg. Coupe
  • 2014-2019 BMW M6 Gran Coupe
  • 2014-2019 BMW M6 Gran Coupe
  • 2014-2019 BMW M6 Competition Pkg. Gran Coupe
  • 2014-2019 BMW M6 Competition Pkg. Gran Coupe

Reviews

Be the first to review “CB163-6001 – Stage 1, S63 High Performance Engine: F10 M5, F12 F13 F06 M6, E70 X5M & E71 X6M”

Your email address will not be published. Required fields are marked *

calling get_sidebar(footer) from footer.php