CBS55-9004 – Stage 2 Power Package for F8X M2C, M2CS, M3, M3C, M3CS, M4C, M4CS

Base Model

Calculated Flywheel Power:

OEM Stock:  414HP / 460TQ
Tuned:    628HP / 516TQ

Measured Wheel Power:

OEM Stock   364WHP / 405WTQ
Tuned:   552WHP / 542WTQ

————————————————————

Comp Model

Calculated Flywheel Power:

OEM Stock:  476HP / 477TQ
Tuned:    628HP / 616TQ

Measured Wheel Power:

OEM Stock   419WHP / 420WTQ
Tuned:   552WHP / 542WTQ

————————————————————

CS Model

Calculated Flywheel Power:

OEM Stock:  493HP / 529TQ
Tuned:    628HP / 616TQ

Measured Wheel Power:

OEM Stock   434WHP / 465WTQ
Tuned:   552WHP / 542WTQ

• Stage 2 Power Package includes:
  • 1 – Stage 3 Software
  • 1 – Optional Discharge Pipe Kit ($470)
  • 1 – CSF Intercooler
  • 1 – CSF Heat-Exchanger
  • 1 – Optional CarBahn Crank Hub & Crank Bolt Capture Plate Kit ($1000)
  • 1 – Optional Hardware Kit ($190)
  • 1 – Optional Exhaust Over-Run ($100)
• Matching Warranty Option ($1,250)
• *A pinned Crank Hub is required for this package, If you don’t already have one please select ours from our drop-down menu.

Philosophy: Intelligent software CarBahn intelligent software has the ability to adapt to a large range of fuels octanes. Out software keeps all safety features and the ability to adapt smoothly form 91 octene to 100 octane and because it can adapt and still make maximum power with each octane you do not need to purchase a custom tune if you are running race gas! It is designed to deliver the highest safe output possible. Smooth Power means software tuned correctly, not over-tuned. We always try to make a natural torque curve, not excessive torque at low RPM that falls off rapidly at high RPM. Excessive torque will break the tires loose, break the engine and drivetrain. Managed torque with a smooth delivery makes the car easier to drive thereby faster and more reliable. Most if not all our competitor tunes attempt to run too much boost, and then compromise reliability by reducing knock sensitivity and thermal protections in an attempt to extract extra power which can cause engine damage.  

Dual Heat exchangers CarBahn Dual heat exchangers very efficient additional heat exchangers are tied into the intercooler heat exchanger circuit to extract more heat from the intercoolers. They are designed to compensate for additional heat generated by increased boost. The reduced in temperature is a must to extract maximum power and ensure reliability of the engine with High boost applications. In addition, they are very light weight compared to other units on the market. This is important to maintain proper weight distribution since they are mounted on the nose of the car.

Doing it yourself: A note on self-tuning tools. There are now programs available that you can buy to tune your car yourself. Many of these tools come with canned programs. Be careful as tuning a high output engine requires tremendous knowledge and experience to extract maximum power without damage.  

Emissions legality: A note on down pipes (removing the catalyst). We have run back-to-back dyno runs with the cat on and off and the power gain is much smaller than most people claim usually around 11hp. We all need to breathe the air. It is difficult to get your car its required emissions test without catalyst and it is illegal.

About Steve Dinan:  Steve Dinan has over 40 years of streetcar tuning experience. As an engine supplier we won 3 prototype racing championships and two overall wins at the 24hrs of Daytona partnering with Chip Ganassi Racing. No one know more about tuning high performance engines than Steve Dinan.

Warranty Information: *Registration with CarBahn Autoworks at time of purchase is required to maintain matching warranty coverage. CarBahn Autoworks reserves the right to deny warranty program enrollment under certain conditions. Please contact us prior to purchase if you have any questions. *Warranty valid on U.S. and Canadian specification vehicles only. If your vehicle is currently covered by the vehicle manufacturer’s new car limited warranty, CarBahn Autoworks’ products are warranted for the remaining term of the vehicle manufacturer’s new car limited warranty. The manufacturer’s new car warranty is limited to 4 years or 50,000 miles (80,000 kilometers in Canada), commencing on the date of first retail sale or the date the vehicle is first placed in-service as a demonstrator or company vehicle, whichever is earlier. CarBahn Autoworks’ warranties are transferable when ownership of the vehicle into which the CarBahn Autoworks products were originally installed is sold. The warranty will, without charge for parts or labor, repair or replace the defective CarBahn Autoworks’ component(s), as well as any original vehicle manufacturer’s component(s) that may have been directly affected by a CarBahn Autoworks component, using new or authorized remanufactured parts. The decision to repair or replace said parts is at the sole discretion of CarBahn Autoworks. Parts for which replacements are supplied under this limited warranty become the property of CarBahn Autoworks. In all cases, a reasonable period must be allowed for warranty repairs to be completed. If your vehicle is outside of the vehicle manufacturer’s new car limited warranty, for two (2) years from the original purchase date of the CarBahn Autoworks product, CarBahn Autoworks will repair or replace, at its sole discretion, any defective CarBahn Autoworks component. This warranty does not include reimbursement for repairs to any original vehicle manufacturer’s component(s) that may have been affected by a CarBahn Autoworks component.   *Warranty exclusions: Return shipping charges, towing charges, rental car fees damage to a component or assembly due to the installation of replacement parts with specifications that differ in any material respect from the original vehicle manufacturer’s or CarBahn Autoworks parts, damage resulting from the unauthorized modification of a CarBahn Autoworks part or assembly, damage resulting from the use of other manufacturer’s products in conjunction with CarBahn Autoworks’ products or systems, damage to the clutch due to power shifting or abuse, brake rotor warp, friction materials, maintenance services and parts when replaced during maintenance such as spark plugs, lubricants, fluids, engine tune-up parts, replacement of filters, coolant and refrigerant, mechanical adjustments or repairs which result from normal wear and tear, drive-belts, light bulbs, damage due to the failure to perform maintenance services at the specified intervals or in accordance with the instructions in the owner’s manual from the original vehicle manufacturer or CarBahn Autoworks’ product instructions, damage attributable to negligence or abuse, improper installation, improper treatment or treatment contrary to the instructions in the owner’s manual from the original vehicle manufacturer or CarBahn Autoworks’ product instructions, engine damage resulting from alteration of CarBahn Autoworks’ original boost pressure, damage resulting from the use of improper or contaminated fuel, damage occurring through corrosion resulting from weak or improper coolant, damage to a CarBahn Autoworks component as a result of a collision or improper collision damage repairs, any vehicle operated in any competitive event or subjected to aggressive track conditions, custom-designed competition parts, damages resulting from loss of time, inconvenience or loss of the use of the vehicle, damage resulting from environmental influences, flood, accident, fire damage, or road salt corrosion, re-manufactured or refurbished products or components (these products are clearly identified as re-furbished and are warranted for the period specified for that particular product).   Estimated Installation Time: 35.00 hours